Facts about TSA

• TSA intervenes at speeds above approximately
40 mph (60 km/h)
• The DSTC symbol (
) in the
instrument
panel will flash when TSA is working
• If the driver switches off the DSTC system's
Spin Control function, TSA will also
be switched off (but will be on again the
next time the engine is started)
• TSA may not intervene when the vehicle
and trailer begin to sway if the driver tries
to compensate for the swaying motion by
moving the steering wheel rapidly
See also:
Activating/deactivating warning signals
The collision warning system’s visual signals are activated automatically when
the engine is started if the collision warning system is switched on.
The audible warning signal can be activated/ dea ...
Setting a speed
Once ACC has been put in standby mode, use the
or
buttons to store (set) the vehicle's
current speed. This puts the system in active mode. The set speed, for example 55
mph, is shown in th ...
Tire designations
Information on the sidewall
Federal law mandates that tire manufacturers
place standardized information on the sidewall
of all tires (see the illustration).
The following information is listed ...
