See also:

Replacing the daytime running lightbulb (models with Active BendingLights only)
1. Remove the rubber cover over the bulb by pulling it off. 2. Turn the bulb holder counterclockwise and pull it out of the headlight housing. 3. Remove the connector from the bulb unit by pres ...

Load carriers (accessory)
Positioning load carriers If wing-shaped load carriers are used, make sure that they are installed on the roof rails with the rounded edge forward. Load carriers of this type are identical and can ...

Brake fluid
Location of the brake fluid reservoir Checking the level The fluid reservoir is concealed under the round cover at the rear of the engine compartment. The round cover must be removed first be ...