See also:

Removing the cover to access the bulbs
NOTE Before starting to replace a bulb, see page 322. 1. Open the retaining clamps by pressing them to the sides. 2. Pull the cover straight out. Reinstall the cover in the reverse order. ...

Label information
1 Model plate: includes e.g., Vehicle Identification Number (VIN), codes for color and upholstery, etc. The model plate is located on the rear side of the B-pillar (the pillar between the front ...

Operation
Controls and display 1 - Resume previous settings, increase speed (each additional press increases speed by 2 - 1 mph (approximately 2 km/h). 3 - Standby mode on/off 4 - Set time interval 5 ...