Engine Drag Control (EDC)

Engine Drag Control (EDC)  - Introduction - Stability system - Comfort and driving pleasure - Volvo XC60 Owners Manual - Volvo XC60

EDC helps keep the engine running if the wheels show a tendency to lock, e.g., when shifting down in the Geartronic manual shifting mode or while using the engine's braking function on a slippery surface. If the engine were to stop, power steering would not function, making the vehicle more difficult to steer.

    See also:

    Roof loads
    Using load carriers Load carriers are available as Volvo accessories. Observe the following points when in use: • To avoid damaging your vehicle and to achieve maximum safety when driving, we r ...

    Replacing the high beam bulb (halogenheadlights)
    1. Remove the rubber cover by pulling it off. 2. Pull the connector from the lamp housing. 3. Loosen the bulb's retaining spring by first moving it to the right and then moving it out of the way ...

    High/low beam headlights
    Continuous high beams 1. Set the ignition to mode II. 2. With the light switch in position 0 or , pull the turn signal lever toward the steering wheel to position 2 to toggle between high and low ...