Auto
The function automatically regulates cooling, heating, blower speed, recirculation, and air distribution to maintain the chosen temperature.
If you select one or more manual functions, the other functions continue to be controlled automatically.
The air quality sensor is engaged and all manual settings are switched off when AUTO is pressed. The display shows AUTO CLIMATE.
Blower speed in automatic mode can be set
under Climate settings
Automatic blower
adjustment. Choose between Low, Normal
or High.
NOTE
Selecting the lowest blower speed may
increases the risk of fog forming on the windows.
See also:
Introduction
The HomeLink1 Wireless Control System provides
a convenient way to replace up to three
hand-held radio-frequency (RF) transmitters
used to activate devices such as gate operators,
garage door op ...
Activating the system
Before any phone voice commands can be used, a Bluetooth-enabled cell phone must
be paired with the infotainment system. If a phone command is given, the system
will inform you If there is no cell ...
Opening and closing the hood
1 Pull the lever located under the left side of
the dash to release the hood lock. An information
symbol will illuminate when the
hood is open.
2 Lift the hood slightly. Press the release
c ...