Storing the position
The mirror positions are stored in the key memory when the vehicle has been locked with the remote key. When the vehicle is unlocked with the same remote control the mirrors and the driver's seat adopt the stored positions when the driver's door is opened.
The function can be activated/deactivated in
MY CAR under Settings
Car settings
Car key memory
Position of door mirrors
and driver's seat in key. See page 133 for a
description of the menu system.
Tilting the door mirrors when parking
The door mirrors can be tilted down to help give the driver a better view along the sides of the vehicle, for example when parallel parking.
To activate this function, select reverse gear and press the L or R mirror control button to tilt the mirror down.
The function can be activated/deactivated in
MY CAR under Settings
Car settings
Side mirror settings
Tilt left mirror or Tilt
right mirror. See page 133 for a description
of the menu system.
The door mirror will reset to its normal position:
• after 10 seconds when reverse is disengaged and the car remains stopped.
• immediately when reverse is disengaged and the vehicle's forward speed exceeds approximately 6 mph (10 km/h).
• immediately if you press the corresponding L or R button again.
• when the engine is turned off.
• when the side mirrors are folded in.
NOTE
Only one mirror can be tilted down at a time.
Automatically tilting the door mirrors when parking
The door mirrors can tilt down automatically to help give the driver a better view along the sides of the vehicle, for example when parallel parking. When the transmission is no longer in reverse, the mirrors will automatically return to their original position.
This function can be activated/deactivated in
MY CAR under Settings
Car settings
Side mirror settings
In reverse gear tilt
left mirror or In reverse gear tilt right
mirror. See page 133 for information about
the MY CAR menu system.
Automatic retraction when locking
When the vehicle is locked/unlocked with the remote key the door mirrors are automatically retracted/extended.
The function can be activated/deactivated in
MY CAR under Settings
Car settings
Side mirror settings
Retract side mirrors
when locking. See page 133 for a description
of the menu system.
Resetting to neutral
Mirrors that have been moved out of position by an external force must be electrically reset to the neutral position for electric retracting/ extending to work.
• Retract the mirrors with the L and R buttons.
• Fold them out again with the L and R buttons.
The mirrors are now reset in neutral position.
See also:
Seat belt maintenance
Check periodically that the seat belts are in good condition. Use water and a
mild detergent for cleaning. Check seat belt mechanism function as follows: attach
the seat belt and pull rapidly on t ...
Erasing warning messages
When a low tire pressure warning message has been displayed, and the tire pressure
warning light has come on:
1. Use a tire pressure gauge to check the inflation pressure of all four tires.
2. Re- ...
Advanced settings
Angle
If the DVD supports this function, it is possible
to select a camera angle for a certain scene. This can be done in DVD mode under
DVD root
menu
Advanced settings
Angle.
DivX Vid ...