Active Bending Lights (ABL)

Active Bending Lights (ABL) - High/low beam headlights - Lighting - Your driving environment - Volvo XC60 Owners Manual - Volvo XC60

Headlight pattern with the Active Bending Light function deactivated (left)
Headlight pattern with the Active Bending Light function deactivated (left) and activated (right)

When this function is activated, the headlight beams adjust laterally to help light up a curve according to movements of the steering wheel (see the right-pointing beam in the illustration).

ABL is activated automatically when the engine is started.

The function can be deactivated/reactivated in the MY CAR menu system under My XC60 Active Bending Lights or under Settings Active Bending Lights or under Settings Car settings Car settings Light settings Light settings Active Active Bending Lights.

See page 133 for a description of the menu system.

NOTE
This function is only active in twilight or dark conditions, and only when the vehicle is in motion.

If a fault should occur in the system, the symbol will illuminate and a message will be displayed as shown in the table.

Parking lights

    See also:

    Inflation pressure
    Tire inflation pressure table The following tire pressures are recommended by Volvo for your vehicle. Refer to the tire inflation placard (see page 289 for its location) for information specific ...

    Installing the ball holder
    1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch assembly. 2. Slide the ball holder into the hitch assembly. 3. Align the hole in the ball ...

    Advanced
    In this mode, body sway in curves is minimal and steering response is very direct. Gear shifting is done at high rpm in each gear for dynamic and active driving. ...