Seat with memory function
Seat with memory function
1 Stored seat position
2 Stored seat position
3 Stored seat position
4 Memory button
Programming the memory
Three different seating and door mirror positions can be stored in the driver seat's memory.
The following example explains how button (1) can be programmed. Buttons (2) and (3) are programmed in the same way.
To program (store) a seat position and door mirror position in button (1):
1. Move the seat (and door mirrors) to the desired position using the seat and mirror adjustment controls.
2. Press and hold down the memory button (4).
3. With the memory button depressed, press button (1) briefly to store the current position for the seat/mirrors.
To move the seat and mirrors to the position that they were in when a button was programmed:
- Press and hold down button (1) until the seat and mirrors stop moving.
NOTE
As a safety precaution, the seat will stop
automatically if the button is released before
the seat has reached the preset position.
See also:
Operation
Settings are made by pressing MY CAR on the
center console control panel and using the
menus displayed. ...
Tunnel console
1 - Storage compartment (for CDs, etc.) under armrest, AUX input/USB connector.
2 - Includes cup holder for driver and passenger, 12-volt socket and small storage
compartment. ...
Unbuckling the seat belt
To remove the seat belt, press the red section on the seat belt receptacle. Before
exiting the vehicle, check that the seat belt retracts fully after being unbuckled.
If necessary, guide the belt ...