Unlocking the doors with the detached key blade
Insert the key blade as far as possible in the driver's door lock. Turn the key blade clockwise approximately one-quarter turn to unlock the driver's door only.
NOTE
After unlocking the driver's door with the
key blade, opening the door will trigger the
alarm.
To disable the alarm:
Insert the remote key in the ignition slot. This also applies to vehicles equipped with the optional keyless drive.
See also:
Tire Pressure Monitoring System (TPMS)
NOTE
USA – FCC ID: KR5S122780002 This device complies with part 15 of the FCC rules.
Operation is subject to the following conditions: (1) This device may not cause
harmful interference, and ...
High/low beam headlights
Continuous high beams
1. Set the ignition to mode II.
2. With the light switch in position 0 or
, pull the turn signal lever toward
the steering wheel to position 2 to toggle between high and low ...
Removing the key blade
Removing the key blade
1 Slide the spring loaded catch to the side.
2 Pull the key blade straight out of the remote
key. ...