Front fog lights


NOTE
Avoid touching the glass on the bulb with
your fingers.
1. Switch off the ignition.
2. Turn the bulb holder slightly counterclockwise
to release it.
3. Replace the bulb. The shape of the foot of
the bulb corresponds to the shape of the
bulb holder.
4. Reinstall the bulb holder by turning it
slightly clockwise. The side of the holder
marked TOP should face upward.
See also:
Setting a speed
Once ACC has been put in standby mode, use the
or
buttons to store (set) the vehicle's
current speed. This puts the system in active mode. The set speed, for example 55
mph, is shown in th ...
Engaging the cruise control function
Before a speed can be set, the cruise control
system must be engaged (put in standby
mode).
Press the symbol (1).
> The symbol illuminates and the
text
(---) mph (5) indicates that crui ...
Increasing or decreasing speed
Use + or – in the following ways to increase or
decrease the vehicle's speed:
1. Press and hold down + or – until the vehicle
reaches the desired speed.
2. Press + or – for approximately a hal ...
