Search paths
Throughout this manual, search paths to the menu system functions are listed as shown in the following example: Audio settings - Equalizer, if the following steps have been taken first:
1. Press the desired mode button, (RADIO, MEDIA, etc). Continue pressing the button to navigate through the various selections displayed (e.g., FM1). Release the button and wait several seconds to automatically accept the selection or turn TUNE and press OK/MENU.
2. Turn TUNE or use the thumb wheel on the steering wheel keypad to scroll to the desired menu selection, such as Audio settings, and press OK/MENU to confirm a selection.
3. Turn TUNE again to scroll to the desired submenu (e.g., Equalizer) where applicable and press OK/MENU.
See also:
Seat belt reminder
This symbol lights up to indicate
that the driver has not fastened his/
her seat belt. ...
Repairing stone chips
1. Place a strip of masking tape over the damaged surface. Pull the tape off
so that any loose flakes of paint adhere to it.
2. Thoroughly mix the primer and apply it with a small brush.
3. When ...
Function
The driver sees what is behind the vehicle and if a person or animal should suddenly
appear from the side.
PAC is mounted on the rear of the trunk lid, near the opening handle.
The camera has bu ...