Voice control support features
- Tutorial: A feature that helps acquaint you with the system and the procedure for giving commands.
- Training: A feature that enables the voice control system to become familiar with your voice and pronunciation, and allows you to set up user profiles. Two user profiles can be voice trained.
These support features are accessed by pressing the MY CAR button in the center console and turning TUNE to scroll to the desired menu selection.
Tutorial
The tutorial feature can be started in two ways:
NOTE
The tutorial feature can only be started when the vehicle is parked and the parking brake is applied.
- By pressing the voice control button and saying "Voice tutorial."
- By pressing MY CAR and going to Settings Voice settings Voice tutorial. Press OK/MENU to begin the tutorial lesson.
The tutorial is divided into three lessons, which take a total of approximately 5 minutes to complete.
By default, the system will begin with the first lesson. To skip to the next lesson, press the voice control button and say "next." Go back to a previous lesson by saying "previous."
Press and hold the voice control button to exit the tutorial.
Training
The system will display up to fifteen phrases for you to say. To start the voice training procedure, press MY CAR and go to Settings Voice settings Voice training. Select User 1 or User 2 and press OK/MENU to begin.
After the training has been completed, remember to set your user profile in Voice user setting.
See also:
If the BRAKE and ABS warning lights comeon at the same time, this could indicate afault in the brake system.
• Stop the vehicle in a suitable place and
switch off the engine.
• Restart the engine.
• If both warning lights go off, no further
action is required.
• If both lights are still on after the eng ...
Bluetooth® functions in the center console control panel
1 Character keys containing letters and
numbers for dialing numbers, adding
phone book entries, etc.
2 TEL: Press this button to activate/deactivate
the Bluetooth® function.
3 TUNE: Turn to ...
Introduction
The Dynamic Stability and Traction Control
system (DSTC) consists of a number of functions
designed help reduce wheel spin, counteract
skidding, and to generally help improve
directional stabi ...