Steep inclines and/or heavy loads
ACC is primarily intended for use on fairly level roads. The system may have difficulty maintaining the correct distance to a vehicle ahead on steep inclines, if the vehicle is carrying a heavy load or is towing a trailer. In these situations, the driver should always be prepared to apply the brakes if necessary.
See also:
Attaching the towing eyelet
The towing eyelet is located under the floor of the trunk. This eyelet must
be screwed into the positions provided on the right sides of either the front
or rear bumper (see illustration).
...
Changing a wheel
1. Apply the parking brake and put the gear
selector in P.
2. Take out the jack*, lug wrench*, the towing
eyelet and the wheel cover removal tool*
stowed under the floor of the trunk.
3. Remov ...
Stage 2: Checking inflation pressure
1. Connect the tire sealing system as described
in stage 1.
2. Refer to the inflation pressure table in this
chapter for the correct inflation pressure. If
the tire needs to be inflated, start ...