Power windows

See also:
Replacing bulbs
When replacing bulbs, keep the following
points in mind:
• Never touch the glass of bulbs with your
fingers. Grease and oils from your fingers
vaporize in the heat and will leave a deposit
on t ...
Replacing the daytime running lightbulb (models with Active BendingLights only)
1. Remove the rubber cover over the bulb by
pulling it off.
2. Turn the bulb holder counterclockwise and
pull it out of the headlight housing.
3. Remove the connector from the bulb unit
by pres ...
Operation
The seats can be adjusted for a short period
after unlocking the door with the remote control
without the key in the ignition slot. Seat
adjustment is normally made when the ignition
is on and ...
