Approach lighting
Approach lighting is activated by pressing the approach light button on the remote key (see the illustration on page 57).
When the function has been activated, the parking lights, indicator lights, door mirror lights, license plate lighting, dome lighting and door step lighting come on.
The time interval for this lighting can be set by pressing MY CAR and going to Car settings - Light settings - Approach light duration. See page 133 for a description of the menu system.
See also:
Gate Operator/Canadian Programming
Canadian radio-frequency laws require transmitter
signals to “time-out” (or quit) after several
seconds of transmission – which may not
be long enough for HomeLink to pick up the
signal during ...
Side impact protection airbags
Side impact airbags – front seats only
Location of the side impact (
SIPS) airbag
As an enhancement to the structural side
impact protection built into your vehicle, the
vehicle is also equippe ...
Setting a speed
Once ACC has been put in standby mode, use
the or
buttons to store (set) the vehicle's
current speed. This puts the system in active
mode. The set speed, for example 55 mph, is
shown in th ...