Turning off (stopping) the alarm
If the alarm is sounding, it can be stopped by pressing the Unlock button on the remote key or by inserting the remote key in the ignition slot. Two short flashes from the car's direction indicators confirm that the alarm has been turned off.
See also:
Park position (P)
Select the P position when starting or parking.
Shiftlock
When P has been selected, the transmission is mechanically blocked in this position.
The brake pedal must be depressed and the ignition mu ...
Using the information button
1. Press the information button
2. All of the indicator lights will flash sequentially for approximately 7 seconds
to indicate that the PCC is receiving information from the vehicle. If any of the ...
Removing the cover to access the bulbs
NOTE
Before starting to replace a bulb, see
page 322.
1. Open the retaining clamps by pressing
them to the sides.
2. Pull the cover straight out.
Reinstall the cover in the reverse order. ...