Interrupting automatic opening/closing
Automatic opening or closing the tailgate can be interrupted in four ways:
• By pressing the button on the
lighting panel.
• By pressing the button on the
remote key.
• By pressing the button on the lower edge of the tailgate.
• By pressing the rubber-covered button under the outer handle on the tailgate.
If one of these actions is taken, the tailgate will stop and reopen.
Pinch protection
If the tailgate is obstructed while it is being operated, the pinch protection function is activated.
• If the tailgate is being opened, the electrical function will be switched off and the tailgate will be released from the electrical system.
• If the tailgate is being closed, it will stop and reopen.
See also:
Trip computer
A READ (press to acknowledge/confirm/erase a message)
B Thumb wheel (used to scroll among the trip
computer menus)
C RESET
The trip computer stores information gathered
from several systems in ...
Compliance
FCC/IC common sentence
This device complies with Part 15 of FCC Rules
and RSS-Gen of IC Rules. Operation is subject
to the following two conditions: (1) this device
may not cause interference, ...
Removing the cover to access the bulbs
NOTE
Before starting to replace a bulb, see page 306.
1. Loosen the cover's four retaining screws with the tool (1) provided in the
vehicle's tool kit (see page 290). The screws sho ...