Selecting a channel category
1. Turn TUNE to display a list of channels.
2. Press EXIT.
3. Turn TUNE to scroll through the list of categories and press OK/MENU to make a selection.
> The channels in the selected category are displayed.
NOTE
• The category All is default, which enables
you to scroll through the entire list
of available satellite channels.
• The channel categories are automatically
updated several times a year. This
takes approximately two minutes and
will interrupt normal broadcasting. A
message will be displayed while updating
is in progress. Information on channel
or feature updates is available at
www.sirius.com.
See also:
Reporting safety defects in the U.S.
If you believe that your vehicle has a
defect which could cause a crash or
could cause injury or death, you
should immediately inform the
National Highway Traffic Safety
Administration (NHTS ...
Introduction
The HomeLink1 Wireless Control System provides a convenient way to replace up
to three hand-held radio-frequency (RF) transmitters used to activate devices such
as gate operators, garage door op ...
How do states use OBD II for emission inspections?
Many states connect a computer directly to a
vehicle's OBD II system. The inspector can
then read "faults." In some states, this type of
inspection has replaced the tailpipe emission
...